1. Scrub the skin on the back of the auricles with medical alcohol before treatment to ensure that the skin is clean and dry.
2. Connect the power adapter to the AC power supply, connect the electrode pads to the main unit, and attach the electrode pads to the mastoid area behind the ear.
3. Turn on the power switch of the main unit and press the “Start/Stop” button on the panel. The “Status” green indicator flashes to indicate that the therapy device is in the treatment state.
4. When the treatment time is over, the treatment device will automatically stop working. If you want to pause treatment during treatment, press the “Start/Stop” button on the panel and the green light will go out, indicating that treatment has been stopped.
5. After the treatment is completed, remove the electrode piece, turn off the power switch, and remove the power adapter from the AC power supply.
The electrode should be used in two pieces at the same time, and the protective film on the surface of the electrode piece should be torn off before use. Remember that the two electrodes cannot be connected with the electrodes to avoid short-circuiting after sticking to each other. Since the electrode patch is aging of the silicone product, the skin of the affected part should be cleaned before each use of the patch. After use, please attach the protective film on the surface of the patch. It can extend the life.
