Physiotherapy Electrode

Why Choose Us

What Effect Does Physiotherapy Electrode Thickness Have on Treatment ?

Physiotherapy electrode is a kind of anti-fouling, deodorization, absorption, inhibition products, with far infrared rays, can better promote blood circulation, after pasting the product, To a certain extent, it can also kill diseased cells, and the electrodes are so soft and flexible that they are suitable for any part of the body, even the finger, which can be completely wrapped, leaving no gap, and the finger can bend freely. With antifouling, deodorization, absorption, inhibition. With far infrared rays, can better promote blood circulation. Pasted in a certain extent and range can kill the diseased bad cells. The use of soft, elastic, can be attached to any part of the body, it can wrap the whole finger without pores, fingers can still bend freely. Various styles of electric patch, suitable for all people in need. Good electrical conductivity, electrical impedance per square inch is only about 20 OHM almost similar to metal, and electrical impedance is uniform. In use, do not worry about the use of physiotherapy electrodes due to resistance points for attention. Pay attention to clean the skin before use, the electrical conductivity of the human skin is relatively poor, if there is oil, dander and other attachments on the skin, it will affect the performance of the physiotherapy electrode, thus affecting the performance of the device, so we must clean the skin before use. The electrode itself has a conductive layer, directly paste the black conductive layer on the skin to ensure close contact with the skin, so that the current evenly contact with the skin, flow to the human body. Conductive self-adhesive plus water care, can make the adhesive sheet to maintain good electrical conductivity and viscosit. Structure performance: keep the humidity of the electrode, enhance the conduction effect. This product is composed of connector, electric cloth, water based polymer gel agent, essential oil and so on. Suitable for medium and low frequency physiotherapy instrument and therapeutic instrument. Take out the electrode, uncover the protective film, and apply the electrode to the site to be treated. Through the stimulation and absorption of drugs on acupoints and affected skin, through the conduction of meridians, it can dredge veins, regulate zang fuorgans, coordinate Yin and Yang, and achieve the purpose of internal and external treatment, disease prevention and treatment. To speed up the percutaneous penetration of drugs and increase the amount of drug introduction. Wide range of application, can easily penetrate macromolecular drugs. Wide indications, safe and reliable, no pain and side effects, no damage to healthy tissue. Multiple effects compound, promote each other, easy to operate.

Tell You the Requirements for Using Physiotherapy Electrode

The electrode sheet of medical equipment has excellent conductivity and strong adhesion, which is suitable for different groups of applications, and the actual effect is remarkable. Reliable, reusable and other characteristics, the recent marketing of ultra-low-cost marketing products: medical equipment electrodes, physiotherapy electrodes, hot electrodes, PET self-adhesive electrodes, breast enhancement electrodes, conductive electrodes, Non-proof cloth electrode pads, slimming electrode pads, silicone rubber electrode pads, different shapes can be customized according to the needs of customers, there are eight-shaped, fenugreek, square, round, oval, 60*80 with wire electrodes Sheet. The electrode sheet of medical equipment has the characteristics of excellent conductivity, strong adhesion to the skin, reliability, and can be reused many times. It is suitable for different groups of applications, and the actual effect is remarkable. Recent marketing of marketing products: medical equipment electrodes, physiotherapy electrodes, hot electrodes, PET self-adhesive electrodes, breast enhancement electrodes, conductive electrodes, non-proof cloth electrodes, slimming electrodes, silicone rubber electrode pads, with different shapes, can be customized according to the needs of customers, such as figure-eight, fenugreek, square, round, oval, and 60*80 wire electrode pads. Disposable acupuncture and physiotherapy electrode pad packaging is damaged, when the electrode pad is dry, it is not suitable for application to prevent burning. If you feel too irritating during application, such as obvious stinging or burning sensation on the skin, you must reduce the compressive strength or temperature of the physiotherapy device. Maintain the environmental humidity of the electrode sheet and improve the actual effect of conductivity. It has anti-fouling, deodorization, digestion and absorption of endotoxin, and inhibits germs. With far-infrared radiation, it can promote the blood circulation system more strongly. It can kill the diseased bad body cells at a certain level and range. The application is soft and malleable, and should be attached to all positions of the human body. It can wrap all the fingers without porosity, and the fingers can still be easily bent. There are various styles of electric patch, suitable for all necessary groups. Good conductivity, the electrical characteristic impedance is only about 20OHM per square inch, basically similar to the metal material, and the electrical characteristic impedance is well-proportioned. In the application, there is no need to worry that the uneven current amount caused by the asymmetry of the electrical characteristic impedance will sting the skin.

Tips for Physiotherapy Electrode Manufacturing and Design

Modern physiotherapy electrodes are often made using conductive hydrogel or hydrocolloid material, which are easy to remove and gentle on the skin. Converters will laminate to one side of the hydrogel or hydrocolloid for additional stability. Then, they’ ll die cut the part component into the final shape, package it, and send it off for use. Each patient demographic has skin that behaves a certain way, which you’ll need to consider to have a project with the best functionality. For instance, neonatal and elderly patients are likelier to possess thin, delicate skin requiring softer, gentler products. Using the wrong type of adhesive on either of these age groups could result in skin damage that worsens the existing condition. Medical tapes for sensitive skin will cling onto the skin but peel easily upon removal, mitigating the risk of damage. Even a light-release acrylic is still tight compared to silicone skin adhesive. For this reason, gentle silicone adhesives are more suitable for patient demographics at a higher risk of torn skin. Medical products are precise by nature, so customers tend to know the exact materials and specifications they need. However, your product price can vary considerably based on the materials you choose. When it comes to the price of skin adhesives, silicone is often 2-3x more expensive than acrylic. Although you have an incredible electrode pad design, a large piece of your product’s success still depends on its manufacturing feasibility. You can prepare yourself for a smoother process by seeking expert advice and assistance in that area. Flexible material converters will be able to advise you on critical production factors such as die cut tolerances and clean room usage. Using materials like conductive hydrogel makes it challenging to hold die cut tolerances. Every die cut design has tolerances that dictate the acceptable deviation range for each part measurement. Your design tolerances might not be an issue if your design is a simple shape (which many electrode pads are). Still, because each product is different, the tolerances may be highly specific or challenging to achieve. Another cost-relevant factor to consider is whether your part needs to be processed in a particle-reduced environment like a manufacturing clean room. Physiotherapy electrodehave adhesive laminated onto one side for skin adhesion.