How to use the high frequency electric knife Electrosurgical Plate:
Special note: Please do not reuse the Electrosurgical Plate as much as possible
1. Select the blood vessels that are closest to the muscles of the surgical site (recommended at the upper arm and thigh of the artery). Avoid sticking to the bones, dry skin, joints and artificially implanted metal parts or close to the ECG electrode line to avoid poor current circuit.
2. First remove the hair and then remove the grease powder on the skin with alcohol, wait for it to dry, and then stick the circuit board.
3. Never open the package until you have prepared it for the skin electrode. To view the electrodes and wires. Do not use if the product is out of date or unsafe. Check the expiration date printed on the box.
4. To determine the location of the patient's surgical paste, avoid touching the conductive rubber surface with your fingers and pulling it out and carefully pressing the four corners.
5. Make sure the circuit board is fully integrated.
6. Use the attached circuit board: Connect the return line to the attached connector and make sure the sub-connector is indeed inserted into the loop jack. Use the non-wired circuit board: Check whether the circuit cable is good. After opening the clamp, place the circuit patch and then clamp it and then gently pull it to make sure it will not loosen. Insert the connector into the circuit socket.
7. When used, its dual-loop safety monitoring system must be started at the same time. If other brands are used, it must be operated in accordance with other safety monitoring systems.
8. Paste the circuit board vertically in the direction of the current from the operating position.
9. Electrode plate size selection criteria: All adults, children or babies should use as many of the largest possible circuit boards as possible. If the loop board is pasted on the upper arm or thigh, avoid loops that do not touch or overlap.