Arc Resistance60 - 120 sec
Dielectric Constant2.7 - 3.2
Dielectric Strength15.7 - 34 kV/mm
Dissipation Factor50 - 190 x 10-4
Volume Resistivity14 - 16 x 1015 Ohm.cm
ABS is readily modified both by the addition of additives and by variation of the ratio of the three monomers Acrylonitrile, Butadiene and Styrene. Heat stabilizers, hydrolysis stabilizers, lubricants, UV stabilizers etc. are being used in non-reinforced and reinforced grades to increase specific material properties.
Hence, grades available include:
High and medium impact
High heat resistance, and
Electroplatable
Fire retardant grades can be obtained either by the inclusion of fire retardant additives or by blending with PVC. In order to increase stiffness, impact resistance and dimensional stability, ABS can be reinforced with fibers, fillers, minerals, etc. It can lead to loss on transparency, yield strength.
Jinhua Huacheng Medical Appliance Co.,Ltd.
Manufactuer of disposable medical products: Electrosurgical pencil,grounding plate,skin stapler and ECG electrode
